Produkten har lagts i din varukorg Visa varukorgenTill kassan
Din webbläsare stöds ej. För bästa upplevelsen rekommenderas en nyare version eller en annan webbläsare.
För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

AIRMT-130

Banddiskant, 60Wrms, 8ohm
013200
I lager
Produktfråga

Vad vill du veta om AIRMT-130?

Skicka

Beskrivning

Air Motion Transformers
are a special type of tweeter systems which have been developed by the German physicist Oskar Heil during his research on the characteristics of the human ear. The main feature is a film-covered cone with a special folding which vibrates like an accordion when an audio signal is applied. This folding allows to accommodate a large cone area at a minimum of space. The AMTs feature a dynamic sound, an excellent transient response, a high efficiency and a low harmonic distortion.
High-end Air Motion Transformer tweeter, 60 W, 8 Ohm

  • Tweeter based on the principle of Air Motion Transformer
  • High-performance neodymium magnet system
  • Fine, dynamic and brilliant reproduction of the high frequencies
  • Folded cone made of Kapton and aluminium
  • High power capability and high efficiency
  • For use from 3,000 Hz on
  • Robust aluminium front panel


Klang+Ton 08,09/2016
“AMT of high efficiency for experienced developers.”


Impedance (Z) 8 Ohm
Transmission method -
Frequency range 2,500-30,000 Hz
Resonant frequency (fs) -
Rec. crossov. frequ. (fmax.) (12 dB/oct.) > 3,000 Hz
Power rating (RMS) 60 W
Peak music power output (MAX) 120 W
Sensitivity 98 dB/W/m
Max. rated SPL -
Max. voltage -
Radiation angle, horizontal -
Radiation angle, vertical -
Suspension compl. (Cms) -
Moving mass (Mms) -
Mech. Q factor (Qms) -
Electr. Q factor (Qes) -
Total Q factor (Qts) -
Equivalent volume (Vas) -
DC resistance (Re) 5.2 O
Force factor (BxL) -
Voice coil induct. (Le) -
Voice coil diameter -
Voice coil former -
Linear excursion (XMAX) -
Eff. cone area (Sd) -
Magnet weight -
Magnet diameter neodymium rods
Mounting cutout 71 x 111 mm
Mounting depth 40 mm
Mounting hole diameter -
Hole spacing X-axis 76 mm
Hole spacing Y-axis 116 mm
Dimensions 90 x 130 x 38 mm
Outside diameter not applicable
Width 90 mm
Height 130 mm
Depth 38 mm
Protective class -
Admiss. ambient temp. 0-40 °C
Weight 0.585 kg
Packing unit 1
Type of speaker AMT
MZF-8614
126430
MDM-5
122240